New Order - Single (MsgType = D, FIXML = Order)

The New Order (D) message type is used by institutions wishing to electronically submit securities and forex orders to a broker for execution.

The New Order (D) message type may also be used by institutions or retail intermediaries wishing to electronically submit Collective Investment Vehicle (CIV) orders to a broker or fund manager for execution.

See VOLUME 7 - "PRODUCT: COLLECTIVE INVESTMENT VEHICLES" of FIX Specification

Orders can be submitted with special handling instructions and execution instructions. Handling instructions refer to how the broker should handle the order on its trading floor (see HandlInst (21) field). Execution instructions contain explicit directions as to how the order should be executed (see ExecInst (18) field).

New Order (D) messages received with the PossResend (97) flag set in the header should be validated by ClOrdID (11) . Implementations should also consider checking order parameters (side, symbol, quantity, etc.) to determine if the order had been previously submitted. PossResends previously received should be acknowledged back to the client via an Execution - Status (8) message. PossResends not previously received should be processed as a new order and acknowledged via an Execution - New (8) message.

The value specified in the TransactTime (60) field should allow the receiver of the order to apply business rules to determine if the order is potentially "stale" (e.g. in the event that there have been communication problems). To support forex accommodation trades, two fields, ForexReq (121) and SettlCurrency (120) , are included in the message. To request a broker to execute a forex trade in conjunction with the securities trade, the institution would set the ForexReq (121) = Y and SettlCurrency (120) = "intended settlement currency". The broker would then execute a forex trade from the execution currency to the settlement currency and report the results via the execution message in the SettlCurrAmt (119) and SettlCurrency (120) fields.

The order message can also be used to request a straight forex trade. Conventions for identifying a forex transaction are as follows:

Orders involving or requiring Pre-Trade Allocation consist of the following steps:

To "take" an Indication of Interest (6) (or Quote (S) ) from an ECN or exchange and not display the order on the book, the New Order (D) message should contain the TimeInForce (59) field with ImmediateOrCancel and an OrdType (40) field with Previously Indicated ( or Previously Quoted).

See Volume 4: "Order State Change Matrices" of FIX Specification

Tag Field Name FIXML Req'd Comments
<Standard Message Header> Y MsgType = D
11 ClOrdID @ClOrdID Y Unique identifier of the order as assigned by institution or by the intermediary (CIV term, not a hub/service bureau) with closest association with the investor.
526 SecondaryClOrdID @ClOrdID2 N
583 ClOrdLinkID @ClOrdLinkID N
<Parties> N
229 TradeOriginationDate @OrignDt N
75 TradeDate @TrdDt N
1 Account @Acct N
660 AcctIDSource @AcctIDSrc N
581 AccountType @AcctTyp N Type of account associated with the order (Origin)
589 DayBookingInst @DayBkngInst N
590 BookingUnit @BkngUnit N
591 PreallocMethod @PreallocMeth N
70 AllocID @AllocID N Used to assign an overall allocation id to the block of preallocations
78 NoAllocs PreAll C Number of repeating groups for pre-trade allocation
=> 79 AllocAccount @Acct C Required if NoAllocs (78) > 0. Must be first field in repeating group.
=> 661 AllocAcctIDSource @ActIDSrc N
=> 736 AllocSettlCurrency @AllocSettlCcy N
=> 467 IndividualAllocID @IndAllocID N
=> <Nested Parties> N Used for NestedPartyRole (538) =Clearing Firm
=> 80 AllocQty @Qty N
63 SettlType @SettlTyp N
64 SettlDate @SettlDt C Takes precedence over SettlType (63) value and conditionally required/omitted for specific SettlType (63) values.
544 CashMargin @CshMgn N
635 ClearingFeeIndicator @ClrFeeInd N
21 HandlInst @HandlInst N
18 ExecInst @ExecInst N Can contain multiple instructions, space delimited. If OrdType (40) =P, exactly one of the following values ( ExecInst (18) = L, R, M, P, O, T, W, a, d) must be specified.
110 MinQty @MinQty N
111 MaxFloor @MaxFloor N
100 ExDestination @ExDest N
386 NoTradingSessions TrdSes N Specifies the number of repeating TradingSessionIDs
=> 336 TradingSessionID @SesID C Required if NoTradingSessions (386) is > 0.
=> 625 TradingSessionSubID @SesSub N
81 ProcessCode @ProcCode N Used to identify soft trades at order entry.
<Instrument> Y
<Financing Details> N
711 NoUnderlyings Undly N Number of underlyings
=> <Underlying Instrument> C Must be provided if Number of underlyings > 0
140 PrevClosePx @PrevClsPx N Useful for verifying security identification
54 Side @Side Y
114 LocateReqd @LocReqd C Required for short sell orders
60 TransactTime @TxnTm Y Time this order request was initiated/released by the trader or trading system.
<Stipulations> N
854 QtyType @QtyTyp N
<Order Qty Data> Y
40 OrdType @OrdTyp Y
423 PriceType @PxTyp N
44 Price @Px C Required for limit OrdTypes. For F/X orders, should be the "all-in" rate (spot rate adjusted for forward points). Can be used to specify a limit price for a pegged order, previously indicated, etc.
99 StopPx @StopPx C Required for OrdType (40) = "Stop" or OrdType (40) = "Stop limit".
<Spread or Benchmark Curve Data> N
<Yield Data> N
15 Currency @Ccy N
376 ComplianceID @ComplianceID N
377 SolicitedFlag @SolFlag N
23 IOIid @IOIID C Required for Previously Indicated Orders ( OrdType (40) =E)
117 QuoteID @QID C Required for Previously Quoted Orders ( OrdType (40) =D)
59 TimeInForce @TmInForce N Absence of this field indicates Day order
168 EffectiveTime @EfctvTm N Can specify the time at which the order should be considered valid
432 ExpireDate @ExpireDt C Conditionally required if TimeInForce (59) = GTD and ExpireTime (126) is not specified.
126 ExpireTime @ExpireTm C Conditionally required if TimeInForce (59) = GTD and ExpireDate (432) is not specified.
427 GTBookingInst @GTBkngInst N States whether executions are booked out or accumulated on a partially filled GT order.
<Commission Data> N
528 OrderCapacity @Cpcty N
529 OrderRestrictions @Rstctions N
582 CustOrderCapacity @CustCpcty N
121 ForexReq @ForexReq N Indicates that broker is requested to execute a Forex accommodation trade in conjunction with the security trade.
120 SettlCurrency @SettlCcy C Required if ForexReq (121) = Y.
775 BookingType @BkngTyp N Method for booking out this order. Used when notifying a broker that an order to be settled by that broker is to be booked out as an OTC derivative (e.g. CFD or similar). Absence of this field implies regular booking.
58 Text @Txt N
354 EncodedTextLen @EncTxtLen C Must be set if EncodedText (355) field is specified and must immediately precede it.
355 EncodedText @EncTxt C Encoded (non-ASCII characters) representation of the Text (58) field in the encoded format specified via the MessageEncoding (347) field.
193 SettDate2 @SettlDt2 N Can be used with OrdType (40) = "Forex - Swap" to specify the "value date" for the future portion of a F/X swap.
192 OrderQty2 @Qty2 N Can be used with OrdType (40) = "Forex - Swap" to specify the order quantity for the future portion of a F/X swap.
640 Price2 @Px2 N Can be used with OrdType (40) = "Forex - Swap" to specify the price for the future portion of a F/X swap which is also a limit order. For F/X orders, should be the "all-in" rate (spot rate adjusted for forward points).
77 PositionEffect @PosEfct N For use in derivatives omnibus accounting
203 CoveredOrUncovered @Covered N For use with derivatives, such as options
210 MaxShow @MaxShow N
<Peg Instructions> N
<Discretion Instructions> N
847 TargetStrategy @TgtStrategy N The target strategy of the order
848 TargetStrategyParameters @TgtStrategyParameters N For further specification of the TargetStrategy (847)
849 ParticipationRate @ParticipationRt C Mandatory for a TargetStrategy (847) =Participate order and specifies the target particpation rate. For other order types optionally specifies a volume limit (i.e. do not be more than this percent of the market volume)
480 CancellationRights @CxllationRights N For CIV - Optional
481 MoneyLaunderingStatus @MnyLaunderingStat N
513 RegistID @RegistID N Reference to Registration Instructions (o) message for this Order.
494 Designation @Designation N Supplementary registration information for this Order
<Standard Message Trailer> Y